<em id="hgw0c"><acronym id="hgw0c"><input id="hgw0c"></input></acronym></em>

    <th id="hgw0c"><pre id="hgw0c"></pre></th><rp id="hgw0c"></rp>
    <th id="hgw0c"><track id="hgw0c"></track></th><tbody id="hgw0c"></tbody>
    資訊分類

    新聞詳情

    How to repair?

    訪問量:
    How

    1.The bonded surface must be dry, clean, dust-free or grease-free, otherwise it will affect the solidifying velocity and bonding strength. Locate the leak and release the gas.

    2.If the hole is very small, such as only 3 mm, then only need to secure with a few spots of glue or use special healant, will be dry in 4 hours then a few spots of glue again, in another 4 hours can be used normally.

    3.Article should be stored in a cool place after use.

    上一個 : Instructions:
    下一個 : Clean up
    上一個 : Instructions:
    下一個 : Clean up

    相關新聞

    中山市安貝爾塑膠制品有限公司

    電話:86 760-2363 3273 / 2363 3051 

    郵箱:sales@anbelcorp.cn

    地址:廣東省中山市東升鎮裕民水字號工業區

    qr

    頁面版權歸中山市安貝爾塑膠制品有限公司  粵ICP備15013109號
    網站建設:中企動力 中山